Fixing Walls or Ceilings in Cleveland

Sheetrock surface pro busy on the jobGot some form of remodeling project going on?

Or maybe there is a hole or other problem in a ceiling or wall you want to get dealt with.

What Gets Done

They set up and fix ceilings and walls in homes and business properties.

Many of these projects are concerning existing structures, performing maintenance and restoration, but also undertake new building projects as well.

Some repair assignments need nothing more than a couple of patches and resurfacing.

Other projects call for taking away and replacing sections of sheetrock.

And they work at residential, commercial and industrial properties around north Cleveland.

Cleveland Drywall Installation and Delivery

A standard installation normally takes five basic steps:

1. Delivering the gypsum drywall sheets to the job location.

2. Putting up each sheet to the ceiling or walls.

3. Cleaning up and taking away project waste and unused product.

4. Taping the seams and joints and putting on joint compound.

5. Finishing, sanding and applying texture.

When the surfaces are sanded and dry, there’re available for painting.

Most of the projects they do require them to finish all of the five actions, but a few property owners want them to complete only a few of the steps.

As an example, if you need them to only deliver it, put it up on your ceiling and walls, and leave the remaining steps for later, that’s something they can do as well.

In a few instances, a property already has sheetrock put up, but it isn’t taped or finished yet, so they are called to come over and finish it and make it set for painting.

Conventional sheetrock isn’t right for high moisture areas, like showers and bath spaces, so they use a moisture-resistant board they can put in there.

And they have a strong, solid backer board product they use on walls where you want to place tile.

They will do their best to work around your schedule.

North Cleveland Drywall Repair Service

Accidents happen at houses all the time.

Plumbing situations and human mishaps are the major causes of sheetrock ceiling and wall damage. Holes, dents and water damage happens.

If the issue with your house is merely a single hole or dent, it’s possible you might fix it yourself by applying a wall-patch kit.

In many cases, the replacement patch which a homeowner applies will not look too terrific after it’s all dried and done.

It usually takes a little practice to blend the old with the new and get the finish just right.

While we urge property owners to not be scared to take on little wall repair tasks, we generally feel that bigger repairs, especially when they are in major areas of a home, be dealt with by a pro.

The final phase of the repair program is to model the finish and texture of the new or repaired work so it will match the present finishes after it is painted.

Typical Repair Projects

Many jobs end up being one of four different situations:

  • Fixing a couple of different holes or seam splits.
  • Correcting a few panels so an area or room can get repainted.
  • Taking off and replacing sheets of drywall damaged by moisture or something else.
  • Doing the removal and replacement of a big area or room. Normally due to a water problem or other serious event.

From small problem mending to big replacements and repairs, they have the experience doing it.

Your Surface Options

There might be one or two alternatives regarding the texture of your new walls.

These are some common choices:Once drywall is put up on the walls it must be taped and finished

Fully unfinished – only taped, designed for non-finished work or storage rooms or garages.

Smooth finish – zero added texture, waiting for painting or wallpaper.

Simple texture – comes with a little extra dimension.

Complex texture – requires additional troweling and more difficult to get done.

Texture match – make your new surfaces match your original ones.

A Little About the Service

They are a dependable group of experienced drywall installers and finishers.

They will do their very best to supply the best quality work possible for a good cost.

They use the best equipment and tools to complete any project safely and quickly.

And all the products they install at your house are durable and strong.

Their personnel are neat and considerate of your home.

They work to guard your household goods from project dust or mess.

They do not want to leave you with a clean up operation when they are completed.

They clear away all the scrap and garbage when they are finished.

They handle a selection of remodeling projects from costly custom residences to basic repair tasks and multiple family or industrial buildings.

They work with homeowners, business property owners and contractors.

Just let them know what your particular situation is.

The Cost of Drywall Delivery and Installation in Cleveland

Most folks like to receive an estimate.

They can do that for you.

Your project cost will depend mostly on two things – the amount of material they will use and how many hours it will take to finish the job.

They should be able to provide a estimate on the phone after they learn a little bit about your prospective project.

Do You want them to Paint It Too?

If you don’t want to start painting it on your own, they can usually accept that part of the job also.

If you would rather do it yourself, or arrange for a separate painting contractor to do it, that is fine too.

Places Where They Work

They can work with most property owners in the central business area, Cleveland Heights and East, Parma and South or Lakewood and points west.

If you’re near downtown, Glenview, Hough, St Clair, Central, Cuyahoga Community College, Tremont, Ohio City, North Broadway, Old Brooklyn, Clark-Fulton or the zoo area — let them know how they can help.

Where is Service Available?

  • Downtown
  • Glenview
  • Hough
  • St Clair
  • Central
  • Cuyahoga Community College area
  • Tremont
  • Ohio City
  • North Broadway
  • Old Brooklyn
  • Clark-Fulton
  • The Zoo area

Touch to Call!