Fix Your Walls or Ceilings in the Overlake WA Area

Sheetrock specialist getting walls all set for paintingGot a drywall job you are working on?

Or it could be you have some ceiling or walls that are ruined and you want to get them repaired.

They Work in Your Part of East King County

This company specializes in drywall installations and repairs.

They do new building projects in addition to any kind of work on existing rooms.

Many repair assignments require nothing more than a couple of patches and resurfacing. Other projects require getting rid of and replacing sections of sheetrock.

And they work on residential, commercial and industrial properties all over north of Bellevue.

Drywall Delivery and Installation Near South Redmond and North Bellevue

In many cases, these are the individual actions that take place during the installation:

1. Truck the gypsum drywall sheets to the job site.
2. Hang the sheets onto the walls or ceiling.
3. Clear up and remove garbage and unneeded material.
4. Tape the joint seams and put on joint compound to every joint area or screw head.
5. Smooth, finish, sand and texture the surfaces.

You can get started with your painting as soon as these steps are completed.

Most property owners simply have them do the full job, from beginning to end, but some have them just complete a few of these activities.

As an example, if you want, they can just install the product to the ceiling and walls and let you take it from there.

Or sometimes a property already has the sheetrock up on the walls and ceiling. They are called out to complete the rest of the taping and finishing work and make it all ready for paint.

In addition to standard sheetrock, they can also bring and install moisture resistant boards to use in bathrooms or around sinks. Plus they install the right variety of cement board for walls where you want to have ceramic tile.

They can take care of all aspects of the installation process.

Overlake Drywall Repair – Patching and Replacement

Accidents and other things will happen when you own a home.

It doesn’t take much to make a hole or dent in a typical wall or ceiling. And it happens more frequently than you may imagine.

If your property has just a single hole, and that hole is in a spot where most people would never see it, you could attempt to fix it yourself by applying a patch.

Homeowner wall patches do not generally look terrific. It’s difficult to make the surfaces level and the surface texture appropriate so it all matches up once it’s painted.

While you might want to try to do your own repairs in places where most individuals will never see, we advise having someone experienced take on hole or dent repairs in the spaces which are far more observable to other people.

The end stage of the repair process is to match the finish and texture of the new work so that it matches the existing finishes after it is painted.

What’s Your Repair Situation?

A repair project can fit into one of these groups:

  • Fixing one or more separate holes or seam splits.
  • Repairing a few sheets so some walls or rooms can get repainted.
  • Eliminating and replacing sheets of drywall damaged by moisture or something else.
  • Doing the removal and replacement of a big area. Typically due to a water problem or other serious event.

From minor projects to major repairs, they can manage it.

Textures and Finishes

What about the finish of your new walls? What type of surface would you like? Listed below are the selections:Replaced sheetrock being worked on by an experienced installer

Totally unfinished – only taped, best for unfinished work rooms or garage areas.

Smooth surface finish – zero texture, all ready for painting or wallpaper.

Basic texture – can bring some extra depth.

Complex texture – height and dimension added and is more work to do.

Texture matching – your replacement materials match your old ones.

Popcorn Ceiling Removal

Was your home built using popcorn ceiling composition?

They could take it away and give your ceilings a contemporary look.

A Contractor in the South Redmond Areas

This is a group of experienced drywall installers and finishers.

They try to finish economical work that make their clients satisfied.

All the products they use in your job are top quality. They use the industry’s finest equipment and tools to get your project done perfectly.

Thinking about the mess?

Most renovations and repairs generate a bit of a mess. They do everything possible to maintain the dust and dirt they generate blocked off into a single area only.

They do not want to leave you a big cleanup operation when they are done. They clear away all the scrap and garbage when they’re done.

Most of the work is carried out in single-family houses, but they also work with industrial and multiple family buildings too.

They have finished assignments for individual homeowners, business managers and contractors. They would be interested in working on your job too.

Cost of Drywall Installation Near Overlake and Redmond

They can give out a free estimate.

Your project cost will depend on the size and range of the job. While they can be very much the same, most situations are relatively unique.

Even if you are not certain precisely what you need done, they look forward to talking to you to find out more.

Who Is Going To Paint All This?

If you don’t want to do your own painting, they can start right away and get the painting undertaken as quickly as possible.

If you are planning on working with a painter, that will be ok with them too.

Are They Working in Your Neighborhood?

They have successfully accomplished projects north of Bellevue and up to Redmond.

Call if you’re near the Overlake, Hidden Valley and the 98052, 98008 and 98007 zips.

  844-805-5482

 

Do You Work in My Area?

They work on homes and businesses all around east King County. This includes Hidden Valley and Overlake, plus the 98008, 98052 and 98007 zip codes.

Make a call and discuss it.

Thanks.

 

844-805-5482

Touch to Call!