Fix Your Wall or Ceiling Problem in South Tacoma

Getting commercial sheetrock finished for paintIs there a remodeling project in the works at your place?

Need someone to deliver and install sheetrock?

Maybe you have a hole or two you want to have mended.

Get Help With Your North Pierce County Property

Work with skilled ceiling and wall installers.

These folks do lots of restoration and remodeling work, but they can normally schedule minor repair work too.

For a maintenance job, they patch what they can patch and repair. Other sections have to be cut out and replaced.

They are ready to work with anyone who has a building they need worked on.

South Tacoma Drywall Delivery – They Install or You Install

There are a few steps to a new installation project:

1. Deliver the drywall sheets to the work place.
2. Hang the sheets to the walls.
3. Tidy up and remove rubbish and unused material.
4. Tape the joint seams and apply joint compound to each joint and screw head.
5. Smooth, finish, sand and apply some texture to the surfaces.

Once these activities are finished, the new wall and ceiling areas are ready to paint.

It is your choice as to how many of those actions they do for your property. Most homeowners have them take care of all five, but they can do just one or two if you want.

For example, in most situations, the inside of a garage might get drywalled, but it will not end up being painted, so the final stage of finishing and sanding is usually omitted.

Some owners want to screw the sheets up on their own, and they just want someone to return later and complete the seam taping, mudding and sanding steps.

They can also install specialized wallboards for water prone areas or use more solid boards on walls that need to be stronger because you intend to mount heavy tile on them when they are ready.

They have the flexibility to get your job done.

South Tacoma Drywall Repair Help

Accidents do happen. Your repair person understands.

Sheetrock might get wrecked in numerous ways. It does not take much effort to make a hole or dent in a ceiling or wall.

If your house problem is restricted to just one hole in a remote wall, there is a chance you could attempt to fix it on your own. Every hardware store sells a kit for patching drywall.

Patches can be challenging to put on properly. A homeowner’s first try at a patch often ends up looking like a small bulge when it is all dry.

A hole in the wall of a very noticeable location, or a hole or dent which can’t be hidden by furniture, ought to be left for somebody who has experience undertaking those types of repairs.

Some property owners are concerned their new surfaces will not match their old surfaces, but they pay attention to make sure they do.

Common Repairs

A typical renovation project is oftentimes one of the following:

  • Fixing or patching one or two separate holes or cracks.
  • Correcting a few sheets so that area or rooms can get painted.
  • Taking away and replacing pieces of drywall damaged by moisture.
  • Finishing the elimination and replacement of a big area or room. Typically due to a water disaster or other event.

It doesn’t matter how large or small your project is, they hope to help you out.

Finish Options

It’s up to you regarding the surface texture of your replacement ceiling or wall. You can leave it with one of several textures, such as these:Taping the joints after installment

Totally unfinished – merely taped, meant for unfinished work places or garages.

Smooth finish – zero texture, in position for painting or wallpaper.

Simple texture – delivers a little extra depth.

Complicated texture – height and dimension added and more difficult to get done.

Texture matching – your replacement materials match with your old ones.

Get Rid of a Popcorn Ceiling

There was a time when most home ceilings in our area were sprayed with that popcorn ceiling texture.

You can hire someone to scrape it off and exchange it with a more contemporary texture.

What They Can Do for You on the South Side of Tacoma

This company works on residential and commercial projects around the Southern Tacoma area.

Their objective is to offer homeowners affordable and great quality interior remodeling work.

They use good products, along with the very best equipment and safety equipment, so they can have your task done as fast, and as safe, as they can.

Many remodeling tasks generate a bit of a mess. These work teams try everything they can to lower the dust and keep it contained.

When the project is done, they try to clean up as well as they can and take all the trash with them.

Through the years, they have carried out all types of projects. They’ve completed work in houses of all types, apartments, industrial and retail sites.

We realize there are other companies that furnish wall and ceiling services. It’s good to consider your options.

South Tacoma Drywall Delivery, Installation or Repair Cost

They can give out a free estimate.

The cost of the project could depend on some different elements, but it is typically related to the amount of labor and materials they need to invest to get the project accomplished.

The easiest way to give a good cost estimate is in person, but that usually isn’t possible. The next best way is by spending a minute on the phone.

Do You Want Them to Paint It Too?

If you have no interest whatsoever in doing the painting, you could have them do that phase of the job as well.

Quite a few homeowners prefer to use a different person to do the painting. And other homeowners want to do the painting themselves.

Do They Work in Your Part of Town?

It is common to find them working in Southern Tacoma.

A lot of work goes on in the Eastside, South End, Tacoma Mall and Fern Hill areas. Plus the 98467, 98466, 98408, 08409 and 98418 zips.

 

Where In South Pierce County Do They Work?

They work at many properties in the neighborhoods south of Tacoma.

This includes the Fern Hill, South End, Tacoma Mall and Eastside neighborhoods, plus the 98467, 98409, 98418, 98466 and 98408 zips.

Thanks.

 

Touch to Call!