Local Van Nuys Drywall

New Gypsum drywall and joint compoundIs your property ready for some remodeling or a new addition?

Or it could be you have an issue with your current walls or ceiling.

Renovation Work Around Burbank

Speak with a wall and ceiling installation and repair expert.

They work on both brand new building projects and existing houses.

During a typical repair job, simple holes or blemishes in otherwise solid pieces are generally patched and then refinished.

In other cases, it’s better to remove and replace sections.

If you’re a homeowner or you run a commercial property, they would be glad to talk with you.

Van Nuys Drywall Delivery and Installation Service

Commonly, this is the way the process goes:

1. Deliver the drywall to the work place.
2. Hang the sheets to the walls and ceiling.
3. Clean up and get rid of rubbish and extra product.
4. Tape the joint seams and apply joint compound to every taped area and screw head.
5. Smooth, finish, sand and texture the surfaces.

Once the new surfaces are textured and dry, plus the final cleanup has finished, you’ll be able to move on to the painting.

While, most of the time, they take care of the whole work process, some homeowners only want them to do a few steps of the project.

For instance, it’s possible that a property owner is not preparing to painting the walls or ceiling right now, so they have them bypass the last finishing and texturing steps.

Or some home owners already have some sheetrock up, they only need someone to tape, mud, sand and finish it right. So they call.

Besides the standard drywall products, there are special fiberglass-based boards developed for use in bathrooms and other high moisture locations.

And there are strong cement wall boards built to support heavy tile on walls where you want to use tile.

They have the flexibility to get your job done.

Repairing Drywall in Van Nuys

Things happen. Your repair person understands.

Plumbing and mishaps are responsible for a lot of their repair projects.

Appliances and plumbing parts sometimes leak and wreck floors, walls and ceilings.

And some people inadvertently put a hole in their wall.

Many owners will attempt to correct minor holes by themselves.

Most little holes or dents will get repaired by using a patch kit, some joint compound and a putty knife.

When a homeowner puts on a wall patch, sometimes it looks terrific, but most of the time it doesn’t look perfect.

It’s trickier than it looks. It takes some practice to make it look acceptable.

All the same, if you have a hole or dent that is in a very noticeable location, you should probably leave that patch repair to a person who is more experienced undertaking that work.

When all the sheetrock is fixed or replaced, the last phase is to be sure the new or repaired ceiling and wall surfaces match up with the existing surfaces in the rest of the room or house.

Regular Repairs

Almost all calls for drywall repair fall into one of four general categories:

  • Fixing an isolated individual hole or crack.
  • Getting multiple unattractive or damaged interior walls fixed and ready for painting.
  • Eliminating and updating water damaged sheetrock.
  • Undertaking bigger scale replacement of one room or more.

They can assist you no matter how little or big your upcoming repairs are.

Types of Textures

You could have a couple of options concerning the final finish we make on your new walls.

Here are a few of the choices:A residential upgrade getting new sheetrock

Completely unfinished – just taped, designed for non-finished work spaces or garages.

Smooth finish – zero texture, completely ready for paint or wallpaper.

Basic texture – will add some extra depth.

Greater texture – hand-troweled and is more difficult to get done.

Texture matching – your replacement wall surfaces match up with your original ones.

Replacing a Popcorn Ceiling near Van Nuys

Is there a popcorn texture up on your ceiling?

They know just how to get rid of it and put on a more contemporary looking finish.

Find Someone To Get it Done in LA County

This is a full service west Burbank drywall contractor.

Their intention is to supply good results at a reasonable cost.

They install good products, and they make use of the best tools and equipment to get your project completed quick.

House improvements can be stressful on a homeowner.

They try to be tidy and respectful of your home.

And they also try to keep the mess down too.

They try to leave no clutter for the homeowner.

They remove all the leftover materials and trash when they’re finished.

They carry out a variety of different projects.

While most of them are within single-family properties, a certain portion consists of commercial buildings too.

They’ve accomplished projects for individual homeowners, industrial managers and local contractors.

They would be interested in handling your job too.

What Will This Cost?

They will be happy to write up an estimate for your project.

The final cost depends upon some different variables, but it mostly is dependent on materials and work hours.

While they wish they could just stop by each and every prospective job site and present an in person quote, that isn’t normally possible.

But if you could call, they should be able to develop a decent cost quote.

Who Is Going To Paint All This?

For people with no interest in doing the priming and painting, you can have them do that component of the job as well.

If you would rather paint it yourself, or plan for a different painting contractor to get it done, that is alright with them too.

Can They Work in Your Central San Fernando Valley Neighborhood?

You can often find them working on jobs west of Burbank in zip code areas such as 91406, 91411, 91401 and 91405.



Do You Work in My SoCal Neighborhood?

If you are west of Burbank in the 91406, 91411, 91401 and 91405 zip codes – call.


Touch to Call!